ANPING MOLONGGANG SPOT WELDING EQUIPMENT COMPANY LIMITED
Anping Molonggang Spot Welding Equipment Company Limited
Add to Cart
Fully Automatic Chain Link Fence Making Machine For Playground Fence
Machine Description
1 Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the DIAMOND SIZE takes place. Different gap sized. After passing from the die the diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to enable the next stitch to take place.
2 The chain link is automatically wound to form rolls when the desired length is manufactured.
3 The machine is controlled by PLC automatic controller, so only one person is needed to operate it.
4 One side or both sides of the end of net hole is twisted or with burr in edge.
Technical parameter
| wire diameter | 1.6--4.0 mm | Motor power | 5.5KW servo motor |
| Weaving width of mesh | Max 4000mm | Capacity | 80--180 square meters/h |
| Mesh Size | 25*25--100*100mm | Weight | 2.6T |
| Mesh Edge | Over lock or twist | Dimension | 4500x2100x1400mm |
| Volts Power: 220V, 380V, 415V, 440V (According to your requirement) | |||
Advantages
1. Taiwan Delta Servo motor 5.5kw +Planetary Reducer (rate 1:3);
2. Original Japan Mitsubishi PLC + Touchable screen;
3. Alarm device + Emergency button;
4. Single mold, double spiral;
5. 12-procedure processed Straightening wheels;
6. Automatic mesh roller;
7. Schneider Low-Voltage electronics;
